Due to the U.S. Thanksgiving holiday, please expect delayed responses during the week of 11/22.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LP5018: Color-mixing and Brightness-control

Part Number: LP5018

Hello Support team,

LP5018 has IRFE pin and this is used as setting maximum value of sink current. Can LP5018 set DC sink current on each OUTs individually? And does color-mixing and brightness-control means to set target duty value for PWM dimming? or can these parameter set analog dimming value?

Thanks,

Koji Ikeda

  • Hi Koji Ikeda,

    1.the DC sink current on each OUTs can't be set individually.

    2.color-mixing and brightness-control means to set target duty value for PWM dimming.

    3. No other parameters support analog dimming setting.

    Best Regard 

    Monet Xu