Dear Team,
The SENS + pin is connected close to the load (long cable). What if this SENS + line (pull down on this line) is broken? How wouldthe LMZ34202 react? Is the device going to try to regulate at 0V?
Regards
Andreas
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Dear Team,
The SENS + pin is connected close to the load (long cable). What if this SENS + line (pull down on this line) is broken? How wouldthe LMZ34202 react? Is the device going to try to regulate at 0V?
Regards
Andreas
Hello Andreas,
The SENS+ pin must be connected to close to the load, if this is broken the feedback to the device will be broken and the output will rise to Vin.
Regards,
Harrison Overturf