Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 64 subscribers
  • Views 197 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCC5304: How to increase drive capability

Hidekazu Someno
Expert 5130 points
Part Number: UCC5304

Hi, Team,

My customer is examining the use of this part to drive FETs which were connected in parallel keeping high speed operation.

But they need more drive capability of FET driver to meet their system requirement.

- is there any method to increase the drive current capability under keeping the several ten ns delay on UCC5304(several ten ns)?

- Is it possible to connect two UCC5304s in parallel to increase drive capability? In this case, Is it possible for two UCC5304s to achieve synchronized operation?

- Is there any other best solution with larger drive capability keeping the delay in several ten ns?

Best regards,

H.Someno