Hi Team,
My customer would like to use TPS56637 in very light load condition such as 0.5A(Max) in order to minimize BOM.
Are there any concern in this use case? I think no issue as long as they use FCCM mode though...
Regards,
Takashi Onawa
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Team,
My customer would like to use TPS56637 in very light load condition such as 0.5A(Max) in order to minimize BOM.
Are there any concern in this use case? I think no issue as long as they use FCCM mode though...
Regards,
Takashi Onawa
Hi Takashi,
The OC limit of TPS56637 is fixed and much higher than the max current in your application. Except for this point, if the OC value is not important for your customer's application, I think there's no obvious concern.
Andrew
Hi Andrew-san,
Thanks for your prompt response on this. I agree with you.
Regards,
Takashi Onawa