Hi Support team
since manufacturing side wave soldering process issue, the thermal pad is high possible would not soldering well
how to estimate the thermal impact if thermal pad is floating?
application
VIN 60V
VOUT 12V/0.75A
thanks a lot
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Support team
since manufacturing side wave soldering process issue, the thermal pad is high possible would not soldering well
how to estimate the thermal impact if thermal pad is floating?
application
VIN 60V
VOUT 12V/0.75A
thanks a lot
Hello Red,
The thermal pad must be electrically attached to the GND pin of the device in order for proper operation to occur, so it cannot be left floating.
Regards,
Harrison Overturf