Hi,
The equation is shown to calculate the ID_PK(max) on the datasheet as below.
Though VCCR is used on the equation(28), is this correct?
This is not VCCR but VCSTE(max), right?
Best Regards,
Kuramochi
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
The equation is shown to calculate the ID_PK(max) on the datasheet as below.
Though VCCR is used on the equation(28), is this correct?
This is not VCCR but VCSTE(max), right?
Best Regards,
Kuramochi