• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 62 subscribers
  • Views 147 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CSD13381F4: switching ON at 1.37 v

Faisal Almesfer
Prodigy 80 points
Part Number: CSD13381F4

Hi,

Can the CSD13381F4 Mosfet be switched ON using Vgs = 1.37 V?

In the schematic below, we will apply 1.37 V to switch LEDs on; can you please comment on the viability of our design?

Regards,

Faisal

  • 0
    TI__Mastermind 29525 points

    Hi Faisal,

    Thanks for your interest in TI FETs. I cannot see the schematic attached to your post. The CSD13381F4 has on resistance specified in the datasheet to a minimum gate-source voltage, VGS = 1.8V. Below that voltage, TI cannot guarantee on resistance and we do not recommend operating the FET with VGS < 1.8V. In order to guarantee proper operation, you will need to modify your design to ensure VGS >= 1.8V.