• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 62 subscribers
  • Views 149 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TPS7A66-Q1: internal pull down at EN pin

TPS7A66-Q1: Enable pin current at V(en) = 3.3V

Alan O
Mastermind 32575 points
Part Number: TPS7A66-Q1

Hello,

My customer would like to know what is the EN pin sink current at V(en) = 3.3V?  The datasheet specifies 1uA max at V(en) = 40V.  Would the sink current scale down proportionally with lower V(en) voltage (for example, 3.3V / 40V * 1uA = 0.0825uA)?

Thanks,
Alan