My customer is using the LM5574 now. Could you please help check the Vin/ VSW(transient)/ Vboot min negative voltages? Thanks.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Thank you for bringing this to our attention as the negative values should be included in the datasheet. We'll work on fixing this.
In regards to the minimum negative voltages, the engineer responsible confirms the following minimum values:
VIN to GND -0.3V
Vsw to GND -1.5V
Vboot to GND -0.3V