Hello,
My customer has an question for TPS7A4101.
They are considering to use it with AC24V input with half wave rectifier circuit.
If the AC24V input is wrongly connected to OUT side like the below figure, could TPS7A4101 be damaged?
Regards,
Oba
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello,
My customer has an question for TPS7A4101.
They are considering to use it with AC24V input with half wave rectifier circuit.
If the AC24V input is wrongly connected to OUT side like the below figure, could TPS7A4101 be damaged?
Regards,
Oba
Hi Oba,
Since there is a diode that protects the reverse current, and the output is rated to 48V. Having a 24 AC at the output as shown should be a low risk of damage and it should be okay.
Regards,
Jason Song