Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
A related question is a question created from another question. When the related question is created, it will be automatically linked to the original question.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
The picture below shows the peripheral circuit of BQ294701, I would like to ask if the 10cell uses the three IC serial connection method to make it correct.
Each device will operate independently. Please make sure that the voltages on each of the devices is correct. Each OUT pin should be connected to a FET for protections. I do not see any issues with this circuit at this time.
