Hi,
Do you know the internal pull down resistor of EN pin? What's the recommended EN pin connection? Connect to VIN directly or use a pull-up resistor to VIN? What's resistance do you recommend? Thanks
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
Do you know the internal pull down resistor of EN pin? What's the recommended EN pin connection? Connect to VIN directly or use a pull-up resistor to VIN? What's resistance do you recommend? Thanks
Hello,
There is no internal pulldown. You can tie to VIn directly if there's no need to disable the controller. Otherwise, a 1MOhm pullup is an option.
Regards,
Tim