• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 64 subscribers
  • Views 301 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CSD87352Q5D: Need few details for EM simulation

Darshan G
Prodigy 45 points
Part Number: CSD87352Q5D

Hi TI,
This is Darshan from Intel, we were carrying out EM simulation for which we wanted few details of CSD87352Q5D mosfet.

Have attached a sample of BJT technical details as an example .

www.comsol.com/.../bipolar_transistor_3d_parameters.txt
and the model link
www.comsol.com/.../bipolar_transistor_3d.mph

We want carry out similar kind of a simulation on CSD87352Q5D mosfet .
Can TI help us with few technical details of CSD87352Q5D mosfet .

Thanks,
Darshan G

  • 0
    TI__Mastermind 35400 points

    Hi Darshan,

    Thanks for your interest in TI FETs. TI does not support COMSOL models. However, we do provide unencrypted PSpice models for our discrete and power block FETs in the product folder on TI.com. Below is a link to the model for the CSD87352Q5D. I believe many of the parameters you are requesting are included in the PSpice model. Please review and let me know if this model works for your purposes. If not, I will need to work with our team to get you this information. Please note, this is a multichip module and includes both the high side and low side FET die in the package.

  • 0 in reply to John Wallace1
    Prodigy 45 points

    Hi John,

    Thank you so much for your reply and also for sharing the spice model but we wanted to build a 3D model .

    Is there anything with TI that can contribute to the 3D model of the given mosfet CSD87352Q5D .

    We are trying to use this model with other circuit components to build a DC-DC converter and analyze the whole ckt using the EM tool and for this simulation mosfet plays a very important role.

    Any kind of 3D model will help us to model the switch CSD87352Q5D precisely .

    Regards,

    Darshan G 

  • 0 in reply to Darshan G
    TI__Mastermind 35400 points

    Hi Darshan,

    I sent you a friend request. After you accept it, we can communicate outside of e2e. The only 3D model I am aware of is a STEP model for the package. This probably not what you're looking for but I am including links below for your information. I am going to close out this thread and will contact you via private message as soon as you accept my friend request.

    https://webench.ti.com/cad/dlbxl.cgi/newstep/DQY0008A.stp

    https://webench.ti.com/cad/dlbxl.cgi/pdf3d/DQY0008A_3D.pdf