This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM25066: SMBA/ still be high when input current warn is triggered

Part Number: LM25066

Dear expert,

We set the the input over-current warning threshold as 7.5A, and 0xD8 IIN LIMIT Warn Alert Mask=0 vis GUI. We found the 0xE1 IIN_OP_WARN=1 when the input current  rises above the threshold value. But the SMBA/ was still high. Is it normal?

Does the input over-current warning  make the SMBA/ low?