This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS22860: Load switching of 6V with 3V MSP430

Part Number: TPS22860

Hello,

I have a project where I want to switch a 6V load with a MSP430. I thought I will take two 3V CR2032 and use it in the shown manner. The question is now if the TPS22860 is connected correctly. Or should I rather connect both VIN and VBIAS to the 6V ? The load goes between the signal "load" on the output of the TPS22860 and GND.

Thanks

Kind regards