• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 62 subscribers
  • Views 108 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS1HA08-Q1: Is there clamp circuit for EN pin?

Yoshiki Ochi
Expert 7585 points
Part Number: TPS1HA08-Q1
Other Parts Discussed in Thread: TPS1HB08-Q1,

Hi team, 

Is there clamp circuit for EN pin?

TPS1HA08-Q1 and TPS1HB08-Q1 says recommended Enable voltage is under 5.5V.
If it has clamp diode for EN pin, is it possible to use 12V input to EN with external resistor for limiting input current to EN?

Regards,
Ochi

  • 0
    TI__Expert 3575 points

    Hi Ochi, 

    The device does not have an internal clamp on the EN pin, the user must ensure that the voltage at the EN pin is within the recommended voltages.

    TPS1HA08 has two voltage clamps integrated to protect the device. The following images provide the location for these clamps. In order to understand these clamps' functionality better refer to page 22 of the datasheet.

    If this answers your query, Please click "This resolved my issue" button.

    Sincerely, 

    Francisco Lauzurique