This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS63050: TPS63050

Part Number: TPS63050

Hi Sir,

QCC using ST MCU/STM32F070CBT6's PB9 GPIO pin46 to adjust VBUS o/p voltage of TPS63050RMWR.


1. How to control GPIO to reach below 2 Vo?

Hi V range between 4.64~5.25, Typical is 5.0V

Low V range between 3.8 ~4.18, Typical is 3.9V

2. Voltage Divide will need adjust?

3. Vout have 1.xV when PS63050RMWR  EN pin 11 is Low, is it make sense?

Thanks, Ian.