• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 62 subscribers
  • Views 172 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMR14050SEVM: About Load Transient Response

Andy Liu3
Intellectual 2500 points
Part Number: LMR14050SEVM

Hi team,

I use LMR14050sEVM and change vout for 10.8V, Vin=12V; and use feedforward capacitor 680pF to optimization loop, reduce the fluctuation of output voltage during load dynamic.

But there is a platform for the measured output voltage waveform, can you help analyze what caused it?

Please refer to the attachment for detailed configuration and waveform.

LMR14050 Design.docx

Best regards,

Andy Liu