LM5181-Q1: Transient Simulation

Kuramochi Tadahiko

Guru 28715 points

Part Number: LM5181-Q1

Hi,

I'm trying simulation by using LM5181-Q1 PSpice Transient Model on Pspice for TI

However, simulation is not executed by the following error;

How should I solve it?

Best Regards,

Kuramochi

over 3 years ago

0 JC Zhu over 3 years ago

TI__Mastermind 29035 points

Kuramochi,

Would you mind sharing your project with us?

Thanks,
JC

0 Kuramochi Tadahiko over 3 years ago in reply to JC Zhu

Guru 28715 points

JC-san,

Thank you for your reply.

I attach it.

LM5181-Q1_PSPICE_TRANS.7z

Best Regards,

Kuramochi

0 JC Zhu over 3 years ago in reply to Kuramochi Tadahiko

TI__Mastermind 29035 points

Tadahiko-san,

Did you get it from this link?

Thanks,
JC

0 Kuramochi Tadahiko over 3 years ago in reply to JC Zhu

Guru 28715 points

JC-san,

Yes, you're correct.

Best Regards,

Kuramochi

0 JC Zhu over 3 years ago in reply to Kuramochi Tadahiko

TI__Mastermind 29035 points

Tadahiko-san,

That's because this model has not been added to PSpice for TI yet. I'll come back with a schedule tomorrow.

Thanks,
JC

0 JC Zhu over 3 years ago in reply to JC Zhu

TI__Mastermind 29035 points

Tadahiko-san,

This work is in queue. It should be available in the next library update. Once that's available, we will update this thread.

Thanks,
JC

0 JC Zhu over 3 years ago in reply to JC Zhu

TI__Mastermind 29035 points

Tadahiko-san,

This model has been added. The next time you run PSpice to TI, it may ask you to update the model library. Select yes to proceed. Once the process is finished, you will be able to see this model in PSpice part Search.

Thanks,
JC

Power management

Power management forum

LM5181-Q1: Transient Simulation