Hello Guys,
Good day.
This is an FYI only.
Upon checking, Figure 2 "Quiescent Current vs Input Voltage" on the datasheet is still not corrected. It is still in mA instead of A and is creating confusion on some of our customers.
Thanks!
Art
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello Guys,
Good day.
This is an FYI only.
Upon checking, Figure 2 "Quiescent Current vs Input Voltage" on the datasheet is still not corrected. It is still in mA instead of A and is creating confusion on some of our customers.
Thanks!
Art
Hi Art:
Thanks for the info. But I didn't get the point. Why you said it should be "A"?
Hello Minqiu,
This was mentioned on this forum link - https://e2e.ti.com/support/power-management/f/196/t/809346
I have attached the image for clarification.
Thanks!
Art
Hi Art:
Thanks for the details. It seems I have different opinion about this figure. Please allow me check with team.
Hi Art:
I have checked with team, the Fig2 is the no load current for the FPWM, and the unit should be "A". No Iq.
So much thanks for point out, and we will update it.