This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLC59116: TLC59116 Open Loop Detect function

Part Number: TLC59116

Dear Sir/Ms.

The function of Open-circuit detection mentioned in 9.3.1 is described in this paragraph. For open-circuit error detection, a channel must be on and the PWM must be off. But without pwm, there will be no Iout. Iout <Iout_th forever. How to use this feature?

Best Regards,

Kami Huang