• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 62 subscribers
  • Views 183 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM43601: Light load operation with external sync

Cedrick
Expert 8270 points
Part Number: LM43601

Hi,

Good day. I hope you are well.

Our customer wants to know if the external synchronization change the light load operation of LM4360x DCDC devices? For example, does an external sync clock force continuous conduction mode (as it does on some other DCDCs)?

I would appreciate your help on this matter.


Regards,

Cedrick

  • 0
    TI__Expert 8130 points

    Hi Cedrick,

    No, the device will not change. The operating frequency of the device will be the same as the external clock.
    We do recommend to connect a resistor to the RT pin regardless if an external clock is used or not. This allows the regulator to continue operating at approximately the same switching frequency if the external clock fails.

    Regards,
    Alejandro