How to set Register Map REG00~REG0A ?
REG00 :
What is EN_HIZ? How do I set this bit ?
What is VINDPM[3:0]? How do I set those bit ?
What is IINLIM[3:0]? How do I set those bit ?
The same question REG01~REG10 ?
Thank you
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
How to set Register Map REG00~REG0A ?
REG00 :
What is EN_HIZ? How do I set this bit ?
What is VINDPM[3:0]? How do I set those bit ?
What is IINLIM[3:0]? How do I set those bit ?
The same question REG01~REG10 ?
Thank you
Hi,
1. HIZ refers to high impedance mode. When the device is in HIZ, REGN LDO is off, the device draws less than IVBUS_HIZ from VBUS and the battery powers up the system.
2. Please visit https://e2e.ti.com/support/power-management/f/196/t/878463 for BQ2429X: Schematic Review and PCB Layout Design Tips and https://e2e.ti.com/support/power-management/f/196/t/875388 for BQ2429x FAQs.
Please refer to the video below for charger operations and valuable tips.
Battery charger system overview (training.ti.com/battery-charger-system-overview
Battery Charger Common Issues: Why my Battery is Not Charging (training.ti.com/battery-charger-common-issues-why-my-battery-not-charging
Thanks,
Ning.