Part Number: LM136-2.5-N
We're using the 5962R0050102V9A (LM136-2.5 MDE) for a space application. We'll be putting it into a hybrid and perform plasma cleaning. Is the die sensitive to plasma cleaning?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: LM136-2.5-N
We're using the 5962R0050102V9A (LM136-2.5 MDE) for a space application. We'll be putting it into a hybrid and perform plasma cleaning. Is the die sensitive to plasma cleaning?
Hi Michael,
I'm looking into this and will get back to you as soon as possible.
Thanks,
Sarah
Hi Michael,
Thanks for your patience. On this die product, the only materials exposed are: passivation oxide, aluminum bond pads, and silicon on the edge of the die. This is very standard across most die products, and TI is not aware of any reasons this product would be more sensitive to plasma cleaning than any other die.
Best regards,
Sarah