This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS51916: Inrush current at power on

Part Number: TPS51916

Hi Team,

When the IC was powered on, the Ivtt source current was 5.6A peak inrush current. (The width of the peak is about 5us.)

The source current limit is typ.3A, but the current is larger than that.

Isn't it assumed that the current limit is not applied to the instantaneous peak current (5.6A)?

Ivtt is not listed in the maximum rating section of the IC. Is it possible that this peak current will cause damage to the IC?

Best Regards,

Kenji