• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 62 subscribers
  • Views 194 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCC21540: UCC21540 driver A/B switch feasibility

Alan Chang
Intellectual 2180 points
Part Number: UCC21540

Hi sirs,

   UCC21540 has 2 output rails A and B. Are they (A and B) independent operation? Usually, A is put on high side, and B is on low side. May I config them in A at low side, and B at high side with correct PWM change?