• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 62 subscribers
  • Views 283 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS3813-Q1: Reset pin issues for TPS3813-Q1

Li Chen92
Expert 3040 points
Part Number: TPS3813-Q1

Hi TI expert

If the WDI signal remains at a fixed level, the reset pin will output a reset signal and the high level will not change? Or according to the internal timer setting, output reset signal regularly?

Best regards,

Thomas

  • 0
    TI__Mastermind 27485 points

    Hi Thomas,

    The TPS3813-Q1 is a watchdog window where the WDI needs to occur between the lower and upper boundary.  If the WDI does not occur within the window, the reset pin will be asserted.  See below:

    To answer your question, the output will reset regularly.

    I hope that I have answered your question.

    Ben