Hi team,
My customer would like to test OVP function on their board. But it look like no OVP function on TPS56339, is it correct?
If there is OVP function on TPS56339, what is the suggestion for customer to do the OVP test?
Best regards,
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi team,
My customer would like to test OVP function on their board. But it look like no OVP function on TPS56339, is it correct?
If there is OVP function on TPS56339, what is the suggestion for customer to do the OVP test?
Best regards,
Hi,
I don't see the OVP description in D/S. You can force a higher voltage at output (programed Vout * 115% or larger ) to check if devices shutdown .
BRs,
Young
Hi Young,
The behavior of device showdown is latch or re-try?
Look like I cannot force a higher voltage than 6V right?
Best regards,
Hardy
Hi ,
If there is OVP , it should enter hiccup mode .
and you can force higher voltage at output .
BRs,
Young