• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 62 subscribers
  • Views 130 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM4140: LM4140ACM-1.0/NOPB part power input requirement

Pradeep Prabhu G
Intellectual 560 points
Part Number: LM4140

Hi Ti Team,

We have used LM4140ACM-1.0/NOPB part in our design to generate 1V reference voltage. We have given 5V supply as input voltage and controlling the enable signal using 2V5 level GPIO.

with 5V input supply and 2V5 enable signal, LDO output voltage is not generating. Please let us know why output voltage is not generating in this configuration.?