This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM3463: Does VLedFB falling below 2.5V constitute a System Re-Powering?

Part Number: LM3463


The datasheet for the LM3463 specifies that there are two ways to clear faults, by applying a falling edge to the EN pin or performing a system re-powering.

My customer is wondering if the VLedFB pin falling below 2.5V constitutes this system re-powering and whether it would thereby clear a fault status.

Thank you,

Austin Allen