Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

  • State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 64 subscribers
  • Views 170 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ24040: BQ24040 input will be 10V

Jim Tseng
Intellectual 2320 points
Part Number: BQ24040
Other Parts Discussed in Thread: BQ24041

If we use BQ24040, and the input will be 10V. But I saw the datasheet showed:

I was confused by the “30V input rating with 6.6V input overvoltage protection”. Why the voltage of overvoltage was lower than input voltage?

  • 0
    TI__Guru 70816 points

    Hello

    The BQ24040 input is rated to 30V absolute max with no damage, this is not and operating condition.  Unit will turn off output and shutdown at 6.6V.  The BQ24041 will shutdown at 7.1V.  

    Input voltage must be below 6.6V (or 7.1V) for unit to operate.  If 10V volts is applied device is in shutdown.