• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 64 subscribers
  • Views 236 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CSD19538Q3A: CSD19538Q3A

user6481139
Prodigy 150 points
Part Number: CSD19538Q3A
Other Parts Discussed in Thread: LMG1020,

My case number is CS0419867. I want to learn that whether the LMG1020 is enough to drive CSD19538Q3A or not.

Thank

M. Bulent KAYA

bulent.kaya@rekrom.com

  • 0
    TI__Mastermind 33695 points

    Hello M. Bulent KAYA,

    Thanks for your interest in TI FETs. No, the LMG1020 does not provide enough gate-source voltage to adequately drive the CSD19538Q3A. For this FET, on resistance is specified and guaranteed down to a minimum VGS = 6V. The LMG1020 uses nominal 5V VDD and will not provide VGS >= 6V. All of our 80V and 100V FETs have a minimum VGS requirement of 6V. TI does not recommend or guarantee operation when VGS < 6V.