This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS7A91: Looking for alternative without that "Discharge trap"

Genius 3985 points
Part Number: TPS7A91

Hi,

we designed in that part, but the dropout is in some case still to high.

So we spend a jumper between VIN and VOUT in case we need every mV (VIN is always low enough for our circuit behind).

Unfortunately we overread the manual section describing what happens if EN wents LOW with the discharge section. and all of a sudden we have ~17mA current when we use EN.

Well, bad luck. Is there an alternative without these discharge stuff?

thanks in advance!

GGA