Hi Team,
One of my customer used TPS659039-Q1 as the attached but there is no output.
Could you give us some advices?
Beat Regards,
Tom Liu
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Team,
One of my customer used TPS659039-Q1 as the attached but there is no output.
Could you give us some advices?
Beat Regards,
Tom Liu
Hello,
First please measure the voltage on Vreg pin 35 using a scope or DC meter. This is the linear regulator output voltage. The Vreg provides the power FETs gate drives. It should be around 5.8V.
Regards
Hello,
I'm sorry I thought the question is about TPS43351 and double checked the thread and is about TPS659039. Are the VSYS_5V and VSYS_3V3 coming up correctly?
Regards
Hi,
In the PMIC schematic, there is voltage divider 15K/24K on NRESWARM. The voltage on this pin is T_RSTOUT_N x (15K/39K). The level could be wrong.
Can you remove these resistors and check if power up is OK?
Regards, Mahmoud