Can the PMP11372 be used in combination with a board similar to PMP20172 to create a charger that supports two Type-C and a Type-A, PD system.
If yes, could you please help me with the reference design for the same or a similar PD system.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Can the PMP11372 be used in combination with a board similar to PMP20172 to create a charger that supports two Type-C and a Type-A, PD system.
If yes, could you please help me with the reference design for the same or a similar PD system.
Hi Bhushan,
These two designs work together to provide two Type C ports. You would need to add another buck converter to provide the Type-A output.
Also see PMP22416. This design uses our newer LM61460 devices for higher efficiency and support of up to 20V output on the Type C ports.
thanks,
Brian
Which Flyback converter would you recommend to provide the PMP22415 with DC power?
Note that the flyback will also act as a rectifier circuit to convert AC to DC
It really depends on your design goals of cost vs. efficiency. If you want to design for lowest cost, I recommend using the UCC28704 PSR Flyback controller. If you want to design for highest efficiency and highest power density, I recommend our UCC28782 active clamp flyback controller.
thanks,
Brian