This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS50601-SP: Pin Trim & Form

Part Number: TPS50601-SP

Hi Team, 

Can you please check and advise with request below:

"

We are using TPS50601-SP CFP20 integrated package in an ongoing project. However, we have to cut and bend the legs of the material.
If there is, can you share a drawing about the cut and bent shape in your hand?

"

Thanks in advance

Best Regards

Furkan Sefiloglu

  • Hi Furkan,

    We use sub-contractor Fancort to derive our footprint for the trim and form profile of our devices that we mount to our EVMs.  The footprint is for reference only. The footprint is associated with a trim/form specification generated for the EVM for this device, and may or may not be appropriate for a customer's end use. Customers will often have their own trim/form requirements to meet assembly and board level reliability goals.

    Attached is the drawing to which we trim/form this package for our EVMs.

    FANCORT_20-HKH.pdf

    Thanks

    Christian