• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 64 subscribers
  • Views 398 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PTD08D210W: Recommended land pattern

Y.Ottey
Mastermind 6145 points
Part Number: PTD08D210W

Dear TI Team

When I checked the data sheet of PTD08D210W, there is no description of recommended land pattern or recommended layout.
If you have any information on recommended land patterns and recommended layouts for PTD08D210W, please let me know.

Best Regards,
Y.Ottey

  • 0
    TI__Mastermind 35115 points

    Hi ,

    I believe I see the recommended land pattern information on page 19 of the datasheet.

    For the actual PCB layout, I would recommend following the typical recommendations for any power converter.

    1. Place any external input bypass capacitors as close as possible to the module pins
    2. Maximize the ground area connected to the module to provide heat sinking and get the best thermal performance
    3. Also keep the width of the traces connected to the power pins as wide as possible to minimize parasitic PCB inductance and resistance

    Anthony