• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 62 subscribers
  • Views 116 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS1HA08-Q1： TPS1HA08 Enable pin disable/enable at load current

Seijiro Matsuoka
Prodigy 550 points
Part Number: TPS1HA08-Q1

Hi team,

Our customer will usTPS1HA08 to their project.

The customer wants to turn off the enable pin at load current.

I think it's no problem, but please let me know if there is anything you need to be aware of.
Best Regards,
Seijiro Matsuoka
  • 0
    TI__Mastermind 19034 points

    Matsuoka-san,

    If you disable the device when there is full load current there is no problem and this is what the device is designed for. Is there any sort of inductance on the load? If there is make sure that the integrated VDS clamp can handle the energy discharge or an external protection scheme is used. For more information see the inductive load section of www.ti.com/.../slvae30