dear:
output current only 1.5A ,could not reach to 3.5A ,could you help me what is wrong with the issue, I need check which the part of schematic?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
dear:
output current only 1.5A ,could not reach to 3.5A ,could you help me what is wrong with the issue, I need check which the part of schematic?
Hello,
can you please confirm this design in webench.
Based on your RT resistor it seems you are designing for 10kHz ...minimum switching frequency is 100kHz...in either case, the output filter appears to be incorrect.