This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LP87702-Q1: How to set Buck switching frequency

Part Number: LP87702-Q1

Dear Team,

1. Could  you guide us how to set buck switching frequency?

2. Could we use OTP memory to set buck switching frequency?

Thanks a lot!

Jimmy

  • Hi Jimmy,

    This post has been assigned to the expert for this part however he is in the EU and will not be able to reply until tomorrow his time. In the mean time, I found the following E2E thread which discusses the same topic. In addition to this I will add that once the device has been powered on the switching frequency for the both the buck and the boost can be changed in the FREQ_SEL Register (Offset = 31h).

    Please see Murthy's reply below for the correct answer.

    Best regards,

    Layne J

  • Hi,

    Its switching frequency cannot be changed by customers and it is part of factory programming. It requires new device spin and part number.

    Regards,

    Murthy