The limiting resistor (ILIM) is set to 250Ω to set the current limit = 2A.
What is the current limit error at this time?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
The limiting resistor (ILIM) is set to 250Ω to set the current limit = 2A.
What is the current limit error at this time?
Hi Higuchi-san,
WE do not spec this value in the datasheet. From the data I believe there is a +- 0.35A spread similar to that at RILIM=400Ohm. Please note this is not guaranteed and is for design reference only.