TLV803SEVM-019: Material change

Peter Hajdu

Part Number: TLV803SEVM-019

According to these PCNs a new fab site was qualified which uses alternate lead finish, bond wire, mold compound and mount compound. On the FSD on website these changes are not yet reflected.

Please provide update Full Material Declarations that have been updated with these changes for TLV803SDBZ, or an estimated time when the new FSD will be available.

over 3 years ago

0 Peter Hajdu over 3 years ago

Prodigy 40 points

The part number TS5A3159DBV i meant to mention was TS5A3159DBV

0 Ajay Padgaonkar over 3 years ago

TI__Intellectual 1695 points

May you please confirm if the question is on the TLV803SEVM-019 which is an evaluation board or the TS5A3159DBV mentioned in your subsequent post?

0 Peter Hajdu over 3 years ago

Prodigy 40 points

TS5A3159DBV is what I need the Full material declaration for and PCN 202010220001A is what I am referring to that has the change details.

0 Ajay Padgaonkar over 3 years ago in reply to Peter Hajdu

TI__Intellectual 1695 points

I am assigning this thread to the product line to which that TS5A3159DBV product belongs. I have separately alerted them. They should be able to help you.

0 Parker Dodson over 3 years ago in reply to Peter Hajdu

TI__Mastermind 43245 points

Hi Peter,

The new FSD will become available when the new site becomes active - this is set for April 15th if this date changes I will let you know!

Best,

Parker Dodson

Power management

Power management forum

TLV803SEVM-019: Material change