Hi team,
Does the TPS7B4250-Q1 become high-Z after thermal shutdown? Or, the device pull down to GND?
Regards,
Nishimura
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi team,
Does the TPS7B4250-Q1 become high-Z after thermal shutdown? Or, the device pull down to GND?
Regards,
Nishimura
Hi Nishimura-san,
During the thermal shutdown, the LDO is shutting down the pass-FET and the output impedance could become high. But please kind in mind, the thermal shutdown is a temporary state, and normally when it happens, the LDO will cycle in and out from the thermal shutdown. The output impedance could change rapidly as well.
Regards,
Jason Song