BQ24195L: BQ24195L Boost mode output

Pongpet Deetalord

Prodigy 10 points

Part Number: BQ24195L
Other Parts Discussed in Thread: BQ24195

Hi,

Is it possible to set BQ24195L to have boost mode output to the load system

i use 3.4V single cell battery

If it possible I would like to know how can i config BQ24195 in order to have boot at 5.1V

Best

over 3 years ago

0 Ning T over 3 years ago

TI__Guru 53391 points

Hi,

The BQ24195L may support boost mode. Please refer to 8.3.1.5 Boost Mode Operation from Battery on the d/s. the boost current is supported from PMID pin as in the application diagram. Please also refer to the EVM User's guide at https://www.ti.com/lit/ug/sluua14c/sluua14c.pdf for the boost mode setup and test procedure.

Thanks,

Ning.

Power management

Power management forum

BQ24195L: BQ24195L Boost mode output