This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS63806: Simulation Error

Part Number: TPS63806

Hi Team,

I am implementing the TPS63806 for a customer. The schematic is as follows-


I am getting the following warning-  

i.e. WARNING(ORPSIM-15256): <X_U1.STEADY_STATE> not a subcircuit param

Please let me know at the earliest, if I am missing out on anything or if the problem is with respect to the software and how do I rectify it?

Thanks & Regards,

Akash Tripathi