My customer pointed out that there is Pin Configuration and Functions difference in datasheet between P3 and P30.
Could you let me know which information is correct ?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
The one on the left is a top view, and the one on the right is a bottom view. It's a little confusing. I would suggest you draw the package on a piece of paper, and then turn around to see from the top or the bottom and you could see both diagrams are indeed correct. This is how I confirmed it.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs and
embedded processors, along with software, tools and the industry’s largest sales/support staff.