Other Parts Discussed in Thread: BQ25171EVM
Where is the best place to connect Vref tied to Stat Leds for BQ25171_q1 in the suggested layout in its data sheet.
Thank you
Zdenek
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Where is the best place to connect Vref tied to Stat Leds for BQ25171_q1 in the suggested layout in its data sheet.
Thank you
Zdenek
Hi Zdenek,
If you have pullups for communication lines on your board you can use these, in the BQ25171EVM we use a 3.3V LDO.
Best regards,
Nick