Part Number: TPS6593EVM
Hi,
after connecting with the evaluation board and start of "SCAN FOR DEVICES" the message "NO DEVICES DETECTED" and "Duplicate devices names (or) invalid name found" are reported.
The evaluation board is supplied with 3.3 V on connector J6. The jumper on connector J15 between signals VSYS - V5V0 and the jumper on connector J37 between pin 2 and pin 3 are removed.
No further changes wer made on the evaluation board. Are special configurations necessary?
What confuses me a bit is the label on the TPS6593EVM. The sticker shows TPS9693xEVM.
Regards, Alexander