• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 62 subscribers
  • Views 112 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCC28C40-Q1: Isolated boost for automotive apllication

Charles Zhang1
Intellectual 2810 points
Part Number: UCC28C40-Q1

Hi team,

My customer wants to find a PWM controller applicable for the condition-Vin=200~380V/ Vout=400V/ Pout=3KW.

Do we have suggested part for this? Thanks.

Regards,

  • +1
    TI__Mastermind 20865 points

    Hi Charles,

    An "isolated boost" converter is commonly referred to as a flyback converter. Your requirements show high voltage on the primary (200 V<VIN<380 V), high power (3 kW), high current (7.5 A) compared to what can be expected from a flyback converter. Your requirements are sometimes met using a phase shifted full bridge (PSFB) topology and TI has many PSFB controller to choose from. Please start by visiting TI.com at PWM Controllers & Resonant controllers. Good luck with your design and thanks for connecting through E2E.

    Regards,

    Steve M