LM10011: LM10011 with TPS51215A

Yang Wu

Part Number: LM10011
Other Parts Discussed in Thread: TPS51215A

Hi Team,

My customer is using TPS51215A.

In TPS51215A's datasheet, it says it supports 2-bit VID output voltage control from 0.5-V to 2.0-V and 0-V VOUT. But I see TI's VID controller LM10011 is 4bit/6it.

Does TI has 2-bit VID controller? Or can LM10011 be used with TPS51215A (only use 2 bits and others left) and support 0-V VOUT?

Thanks a lot.

Best regards,

Yang

over 3 years ago

+1 Yuchang Zhang over 2 years ago

TI__Mastermind 18510 points

Hi, Could you please explain why you would like to use LM10011 connected with 51215A? as you know, 51215A has 2-bit VID and it can be controlled by SOC/CPU to change output by VID selection itself.

Yuchang

0 Yuchang Zhang over 2 years ago in reply to Yuchang Zhang

TI__Mastermind 18510 points

Hi Yang,

seems no feedback, Maybe you have solved this question, i will close this thread and you can open it if more support needed.

Yuchang

Power management

Power management forum

LM10011: LM10011 with TPS51215A